新皇冠体育app

Encyclopedia of Earthquake Engineering

Living Edition
| Editors: Michael Beer, Ioannis A. Kougioumtzoglou, Edoardo Patelli, Ivan Siu-Kui Au

Performance-Based Design Procedure for Structures with Magneto-Rheological Dampers

  • Yunbyeong ChaeEmail author
  • Baiping Dong
  • James M. Ricles
  • Richard Sause
Living reference work entry
DOI: http://doi.org/10.1007/978-3-642-36197-5_310-1
  • 3.8k Downloads

Synonyms

Introduction

It is well-known that supplemental damping devices increase the energy dissipation capacity of structures, reducing the seismic demand on the primary structure (Constantinou et al. 1998; Soong and Dargush 1997). A structural system with supplemental dampers is often represented by an equivalent linear system. Kwan and Billington (2003) derived optimal equations for the equivalent period and damping ratio of SDOF systems with various nonlinear hysteresis loops based on time-history analysis and regression analysis. Symans and Constantinou (1998) studied the dynamic behavior of SDOF systems with linear or nonlinear viscous fluid dampers and derived an equation for the equivalent damping ratio of the nonlinear viscous fluid damper. Ramirez et al. (2002) proposed a simplified method to estimate displacement, velocity, and acceleration for yielding structures with linear or...

This is a preview of subscription content, log in to check access.

References

  1. AISC (2005a) Code of standard practice for steel buildings and bridges. American Institute of Steel Construction, Chicago
  2. AISC (2005b) Seismic provisions for structural steel buildings. American Institute of Steel Construction, Chicago
  3. Applied Technology Council (2009) Quantification of building seismic performance factors. ATC-63 project report (FEMA P695), Redwood City
  4. Chae Y (2011) Seismic Hazard mitigation of building structures using magneto-rheological dampers, PhD dissertation, Lehigh University
  5. Chae Y, Ricles JM, Sause R (2010) Development of a large-scale MR Damper model for seismic hazard mitigation assessment of structures. In: 9th US National and 10th Canadian conference on earthquake engineering, Toronto
  6. Constantinou MC, Soong TT, Dargush GF (1998) Passive energy dissipation systems for structural design and retrofit. Monograph series, MCEER. State University of New York at Buffalo, Buffalo
  7. Fan CP (1998) Seismic analysis, behavior, and retrofit of non-ductile reinforced concrete frame buildings with viscoelastic dampers. PhD dissertation, Lehigh University, Bethlehem
  8. Federal Emergency Management Agency (2000a) Recommended seismic design criteria for new steel moment-frame buildings. Report no. FEMA-350, Washington, DC
  9. Federal Emergency Management Agency (2000b) Prestandard and commentary for the seismic rehabilitation of buildings. Report no. FEMA-356, Washington, DC
  10. International Code Council (2006) International building code. International Code Council, Falls Church
  11. Kwan WP, Billington SL (2003) Influence of hysteretic behavior on equivalent period and damping of structural systems. ASCE J Struct Eng 129(5):576–585
  12. Lee K-S, Fan C-P, Sause R, Ricles J (2005) Simplified design procedure for frame buildings with viscoelastic and elastomeric structural dampers. Earthq Eng Struct Dyn 34:1271–1284
  13. Lee K-S, Ricles J, Sause R (2009) Performance-based seismic design of steel MRFs with elastomeric dampers. J Struct Eng 135(5):489–498
  14. Lin WH, Chopra AK (2003) Earthquake response of elastic Single-degree-of-freedom systems with nonlinear viscoelastic dampers. ASCE J Eng Mech 129(6):597–606
  15. Newmark NM, Hall WJ (1973) Seismic design criteria for nuclear reactor facilities. Report no. 46, Building Practices for Disaster Mitigation, National Bureau of Standards, U.S. Department of Commerce, pp 209–236
  16. OpenSees (2009) Open system for earthquake engineering simulation. Pacific Earthquake Engineering Research Center, University of California, Berkeley
  17. Ramirez OM, Constantinou MC, Gomez JD, Whittaker AS (2002) Evaluation of simplified methods of analysis of yielding structures with damping systems. Earthq Spectra 18(3):501–530
  18. Sause R, Hemingway GJ, Kasai K (1994) Simplified seismic response analysis of viscoelastic-damped frame structures. In: 5th U.S. National conference on earthquake engineering, Vol. I, pp 839–848
  19. Seo CY, Lin YC, Sause R, Ricles JM (2009) Development of analytical models for 0.6 scale self-centering MRF with beam web friction devices. In: 6th International conference for steel structures in seismic area (STESSA), Philadelphia
  20. Somerville P, Smith N, Punyamurthula S, Sun J (1997) Development of ground motion time histories for Phase 2 of the FEMA/SAC steel project. Report no. SAC/BD-97/04, SAC Joint Venture, Sacramento
  21. Soong TT, Dargush GF (1997) Passive energy dissipation systems in structural engineering. Wiley, West Sussex
  22. Symans MD, Constantinou MC (1998) Passive and fluid viscous damping systems for seismic energy dissipation. ISET J Earthq Technol 35(4):185–206

Copyright information

© Springer-Verlag Berlin Heidelberg 2021

Authors and Affiliations

  • Yunbyeong Chae
    • 1
    Email author
  • Baiping Dong
    • 2
  • James M. Ricles
    • 3
  • Richard Sause
    • 4
  1. 1.Department of Civil and Environmental EngineeringOld Dominion UniversityNorfolkUSA
  2. 2.Department of Civil and Environmental EngineeringLehigh UniversityBethlehemUSA
  3. 3.Bruce G. Johnston Professor of Structural Engineering, Department of Civil and Environmental EngineeringLehigh UniversityBethlehemUSA
  4. 4.Joseph T. Stuart Professor of Structural Engineering, Department of Civil and Environmental EngineeringLehigh UniversityBethlehemUSA